Varieties of cable reels and hose reels(transferring gas or liquid)are available designed and manufactured by our side factories,.Cable reel driven by swirling spring is optional for the cables with less weight and short traveling distance. Cable reel driven by moment motor or three-phase asynchronous motor(hysteresis motor)is suitable for the cables with heavy weight and much longer traveling distance. According to the on-site conditions, the exogenetic force or weight-loaded driving can be used as driving power.
If you need those kind of Magnets please contact us and give us your requirements!
|
| |
Guide for Pattern Selection |
|
| |
1. Spring type cable reel is designed for all kinds of mobile electric appliance with 500V AC under.
2. Drum length of cable is based on L in Installation Pattern Drw.
The available cable lengths are:
1). L+3 loops for pattern A;
2). L+h+3 loops for pattern B (value h must be noted when ordered);
3). L+H+h+3 loops for pattern C & Dl;
4). Pattern E and F confirmed per the customers' on-site conditions, specified separately when ordered;
3. In pattern C, the reel is fixed on the ground. When coiling up or spooling off the cables, there appears relative friction between the cables and the ground. Thus, a rollaway nest should be mounted within the cable motion area to minimize wear-and-tear of the cable.
4. In pattern F, generally H=0.14L, h=0.5H. If H is less than 0.14L, h>0.5H, the values H and h must be specified when ordered.
5. Cable reel will be equipped with specially designed rolling wheel brackets for the convenience of installation if provided with electric block to run on the single bridge travelling crane.
6. Cable reel coiling-up and spooling-off directions are marked in the overall dimension drawing. Make notes when ordered unless otherwise specified.
7. The mass of the cable is excluded from Mass column in overall dimension table.
8. The motor powered reel is generally of overhanging pattern in structure forms.
9. Special sizes and special purposes of the products can be consulted or negotiated between the customers and the producer on meeting or in written letters.
|
|
| |
Installation pattern sketches
|
|
| |
|
|
| |
Pattern E-Horizontal overhanging coiling |
|
Pattern D-Horizontal coiling on the ground (coiler movable) |
|
Pattern F-Overhanging coiling |
|
| |
 |
|
 |
|
 |
|
| |
|
|
|
|
|
|
| |
Pattern A-Vertical coiling |
|
Pattern B-Vertical coiling through radial reversing wheel |
|
Pattern C-Horizontal coiling on the ground ( reel fixed ) |
|
| |
 |
|
 |
|
 |
|
| |
|
|
|
Mode Instruments |
|
| |
 |
|
| |
|
|
| |
|
|
